Facebook Twitter Google+ Linked In
Home >>> Residential Lift



Numerous people attempt to make their home unique when compared with different homes. It could be the look, the expense in question, the installation of different luxuries, etc. Remembering the need of the family units we attempt to make our homes elite. The installation of residential lifts at our homes assumes a significant part in keeping up the uniqueness of your home.

The residential lifts in Chennai have been made popular among people who attempt to design their new homes just as among people who wish to remodel their current homes with the installation of a lift.



• Think about the lift shaft or hoist way as a vertical corridor inside the home. Rather than the hallway connecting rooms, it is interfacing floors. The hoist way contains three sections:
• The pit, which is the space below the least arrival that allows the lift floor to turn out to be flush with the most reduced landing floor.
• The travel, which is the separation from the lowest floor to the highest floor.
• The overhead, which is the measure of room needed for the lift to step up to the highest floor, and maintain sufficient leeway over the vehicle to the roof of the shaft.


The machine room is the place where the practical segments of the lift that make the lift work, will be installed. This room will regularly contain the control box, hydraulic tank, or drum motor and cables. A machine room commonly requires a 30" wide x 36" profound working space before the regulator. Certain lift drives don't need a machine room; these lifts are regularly referred to as machine-room-less (MRL) lifts. If you have the craving and capacity to utilize a MRL lift, the motor and regulator will be mounted inside the deep opening, regularly at the highest point of the hoist way.


The lift structure anchors to a divider in the shaft. It comprises of the guide rails, rail sections, stabilizer system, and some mechanical devices that will shift depending on the drive system. The lift vehicle will go all over on the design. The structure is the part of the home lift that sends power and gives strength.


The lift car is the last part of the lift. This is the part that the client will see, and can be redone to acquire the look you need for your home.